
Power cable factory DC Sub Array Cable project support cable
Category:
Products
Cable & Wire
AS/NZS Cable
Power cable factory DC Sub Array Cable project support cable

hotline:
Power cable factory DC Sub Array Cable project support cable
1.Descriptions and Application
In the solar photovoltaic systems, the DC Sub Array cable is mainly applied to the cable connection between the DC distribution box to the inverter & the junction box to the DC cabinet.
2.Standards
AS/NZS 5000.1
3.Construction
(1)Conductor
Class 2 circular aluminum alloy 1350 of the type specified in AS/NZS1125
(2) Insulation
Cross-linked polyethylene compound XLPE X-90 in accordance with AS/NZS3808
(3)Outer sheath
High density thermoplastic polyethylene(HDPE) complied with AS/NZS3808, and has the characteristics of termite resistant.
Core colour: White or natural
Sheath colour: Black
4.Technical data
(1)Rated voltage
AC U0/U(Um):0.6/1kV
DC 1.5kV
(conductor-conductor, non earthed system, circuit not under load).
(2)Test voltage
AC 6.5kV/5min or DC 15kV/5min
(3)Temperature range
Max. conductor temperature(continuous operation): ﹢90℃
Max. conductor temperature(short-circuit for 5 sec): ﹢250℃
(4)Cable minimum installed bending radius
20 x cable O D. after installation
message